Network corrected real-time is a technological approach to high precision GPS/ GNSS positioning that has been theorized about, studied, experimented with, and implemented in various academic, scientific, and commercial forms for nearly a decade.
Click Here to begin the series,
or view the Article PDF's Here
Test Yourself
Got Answers?
Test your knowledge with NCEES-level questions. Start HERE
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
A 477Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE
I was with a group of my buddies not too long ago and it usually doesn't take much time before the conversation turns to some of the not so brilliant things we may have done in our youth. I really enjoy those stories and even contribute a few of my own every now and again. Sometimes, they involve other friends or perhaps a member of our own families.
My father has been gone about 12 years now. He wasn't the easiest guy to grow up with and at times was pretty hard on us kids. He was a consummate laborer and if it had to be dug up or moved, piled or unpiled, he was the right guy for the job. He left most of any complicated thinking to others, and of course, wasn't then subjected to any blame if the plan went awry. Every now and then though, he would outfox himself and we would get to smile about it.
More than 16 years ago, my younger brother, Pete, bought an existing deer camp in an area he enjoyed hunting. It wasn't much of a camp, but it was a start. (He has since built a new one and it is by far one of the finest deer camps on or near the Mosinee Grade.) Along with this camp came the need to get some deer blinds ready for the season. One of the luxuries you can have in these blinds is a little portable propane heater. They do a great job of taking the chill out of the blind, which means it is easier to hunt much longer. When I hunted with Dad as a young lad, we didn't have anything at all like this set up.
We hunted from home, which meant getting up even earlier to be out in the woods before dawn and getting home a lot later after dark. There were no blinds to sit in, let alone heaters to keep you warm. We sat out all day on tree stumps or piles of pine boughs, so the concept of a camp and deer blinds was kind of foreign to my father. On top of that he was a proud man and saw any movement toward luxuries as a sign of weakness. He quickly bought into the idea of hunting from camp, though, as he could rationalize less drive time and less wasted gas. The idea of hunting out of a blind was a little tougher, but he came to realize he wasn't getting any younger, and not being totally exposed to the elements wasn't a terrible idea. He drew the line at the idea of a heater. It was like the last straw for him. My brother told him he would get him a propane heater as a present, but that even made Dad more determined. You see, getting presents was also a sign of weakness. I told you it wasn't easy growing up around him.
One sunny day in mid-fall with deer season only a few short weeks away, my brother stopped by the family house and found our father in the backyard sitting at the picnic table working on some contraption. It seems the more Dad thought about the heater thing, the more he understood it may be nice to be warm during the day, but would be damned if he would go out and buy a new unit. It happened that he found an abandoned collapsed camp in his travels while bird hunting that fall. While rooting around in the remains, he came across this antiquated little heater that ran on fuel oil. It was a very early attempt at portable heat and my brother wasn't sure how well this was going to work. In time Dad had it cleaned up and running right there on the picnic table. According to my brother it was throwing off heat and actually humming along quite well. Pete just shook his head, wished Dad well, and left.
Soon enough, it was opening day of deer season. My father and brother headed out to their respective blinds early in the morning. It wasn't very long before the sun came up and soon after my brother was able to bag his buck. After preparing it for the trip, he started his way back to camp. He had to pass quite close to my father's blind so he thought he would swing by and show Dad his deer (as well as checking on him, too). As he got closer to the blind, he could see something was horribly wrong. Black smoke billowed out of every crack and opening in the blind. He stepped up his pace. Just as he reached the blind the little side door opened up and my father's "free" fuel oil heater came flying out of the doorway and tumbled across the landscape into a nearby snow pile. Dad followed close behind, covered from head to toe in thick, black soot. Pete said he couldn't see Dad's eyes until he blinked. Dad was doing his best to start a line of cuss words that would have embarrassed anyone, but each time he started to speak all that came out was a little puff of black smoke. That was too much to take and Pete couldn't help but start to laugh.
He took Dad back to camp and got him cleaned up. Dad didn't think the whole thing was all that funny until later, but he did get all the soot out of his system and was able to finally properly swear at the blankety-blank heater. It seems it wasn't running correctly right from the first time he lit it. The more he tried to adjust it in the dark, the more soot it threw off until he finally kicked it out of the blind. I have heard this story several times and can't help but laugh when I picture my Dad covered in soot and not being able to swear.
A day or so later Pete came back to camp and found Dad fiddling with yet another heater. This one was much newer than the first, and although it did run on propane, it was nowhere near brand new. Pete didn't want to ask where it came from and Dad wasn't offering. He just looked up at Pete and said, "A little cleaning and adjusting and I will have this thing working like one of your fancy store-bought ones." Pete just shook his head, reached in a cabinet, and took out an extra roll of paper towels...
And that's the situation as I survey it...
John Matonich is President and CEO of Rowe Incorporated, and is a licensed surveyor in Michigan and Ohio. He is Chairman of the Joint Gov't Affairs Committee for ACSM, Chairman of the Bylaws & Resolutions Committee for NSPS, and Vice President of NSPS.
A 477Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE
Editorial: Surveyors Get the Point
For me, the 6th annual ESRI Surveying and Engineering Summit represented a sea-change. While earlier meetings I attended were designed to attract surveyors into the world of GIS, the trend has taken hold and surveyors everywhere are busy incorporating GIS into their work flows. I like the way .... Read the Article
Point to Point: Can Retracements Be Confidential?
Do your clients have a right to expect that the survey you conduct for them will be confidential? Let's assume for a moment that mandatory survey recording laws did not exist (and indeed, they do not exist in most areas) and that no other obligation to divulge the results of the .... Read the Article
WowFactor: TPC Desktop 2008 Global Background Clearing
TPC Desktop 2008 is all about making it easier to work with your survey data and drawings. It's about doing less work and getting more done. Their new Global Background Clearing is a good example. We put a lot of information on drawings. Take a typical ALTA or site survey-- they can ... Read the Article
Wildfire Maps Keep Agency Missions Blazing Forward
Blazing out of control wildfires have been sweeping across northern California this summer just as they did last fall in the southern region of the state and many times previously, leaving in their path death and destruction. These fires are ... Read the Article
Applanix: Solutions for Mobile Mapping and Positioning
It's a given that Global Navigation Satellite Systems (GNSS) don't work everywhere, for example if the signals are sufficiently blocked by such things as tree canopy, or urban canyons. Because of the need to locate things everywhere, a great deal of .... Read the Article
RTN-101: Mapping (Part 14)
Much of what surveyors do is essentially mapping, and much of mapping is/could/ would/should be characterized as surveying. But what certainly raises the blood pressure of many surveyors is when one puts the two terms in the same sentence, as I have just done. The debate over.... Read the Article
The Marriage of GIS and Land Surveying (No Shotgun Needed)
Too often the GIS professional and the surveyor are at odds; a hoity-toity GIS guy looks askance at a muddy-booted surveyor who wants to pin him down on accuracy and ... Read the Article
Software Review: I-Site Studio 3.0 and 4400 Laser Scanner
It seems that every surveying magazine now overflows with stunning 3D images of everything from people, to cars, to historic landmarks, to infrastructure. Point clouds of intricate structures and shapes naturally captivate the geometrically adept mind. But what about the ... Read the Article
Product Review: SECO Poles and Prisms
Tired of prism pole slippage and non-adjustable prism pole bubble levels? Tired of tilting prism target assemblies that slip as you are walking back to the instrument or having to lift the prism pole out of the bipod ring, or not being able to adjust the "spring" out of ... Read the Article
Vantage Point: If Not Now, When?
June was a difficult month. A friend less than a year older than I am quickly succumbed to a resurgence of breast cancer. A colleague three years younger suddenly died of complications related to diabetes, although he had looked fine just a few months ago when I last saw him. Such events make ... Read the Article
Surveying `Da Situation: The Last Straw
It is bad enough that we've already had to endure months of election campaign rhetoric, but I read an article awhile back that was the last straw. I happened to be scanning the newspaper when I came across a piece reporting that the rock star Bruce Springsteen had ... Read the Article
• 15th Annual GeoTech - October 7-8, 2008, NOAA’s Auditorium and Science Center in Silver Spring, MD. Hosted by Potomac Region of the American Society of Photogrammetry and Remote Sensing and co-hosted by the NGS, 1 day of Workshops taught by experts, and 1 day of Technical sessions.,
• GITA's First Annual GIS for Oil & Gas Conference - Calgary - Nov. 6-7, 2008, Calgary Marriott Hotel, Calgary, Alberta, Canada. The GIS for Oil & Gas Calgary Conference will build on the momentum from GITA’s GIS for Oil & Gas Conference held in Houston, Texas, every September.
• GITA's “How to Financially Justify Your Geospatial Projects” Two-day Workshop - Nov. 13-14, 2008 in Denver, Dec. 11-12, 2008 in Tampa. All types of organizations now have a unique opportunity to learn from GITA’s landmark research project, “Building a Business Case for Geospatial Information Technology: A Practitioner’s Guide to Financial and Strategic Analysis.”
• Geography in Las Vegas - March 22–27, 2009. Join 8,000 geographers, GIS specialists, and environmental scientists from around the world in Las Vegas for the very latest in research, policy, and applications in geography, sustainability, and GIScience, during the annual conference of the Association of American Geographers.
• California Land Surveyors Association 2009 Conference - March 28-April 1, 2009, Hilton San Diego Resort (Mission Bay).
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
, (707) 578-6016.
• SPAR 2009 - March 30- April 1, 2009, Hyatt Regency Hotel, Denver, Colorado. SPAR 2009 will focus on best practices for using 3D imaging technologies to design and deliver capital projects as well as operate, modify and maintain production, manufacturing and infrastructure assets.
Reach our audience of Professional land surveyors and Geo-Technology professionals with your career ad. Feel free to contact us if you need additional information.