About Amerisurv| Contact    
Magazine | Newsletter    
Flickr Photos | Advertise    
HomeNewsPhotosNewsletterCommunityStoreJobsAuthorsHistoryArchivesVideoSubscriptionsBlog
 
advertisement


Subscriptions
 
Continuing Series
     RTN
Network corrected real-time is a technological approach to high precision GPS/ GNSS positioning that has been theorized about, studied, experimented with, and implemented in various academic, scientific, and commercial forms for nearly a decade.
Click Here to begin the series,
or view the Article PDF's Here
Test Yourself

Got Answers?
Test your knowledge with NCEES-level questions.
  Start HERE
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Sponsored By


Partner Sites

symbianone
lbszone.com
GISuser.com

Associates

ACSM
GIA
ASPRS

newsnow 

Home arrow Archives   The American Surveyor     

A Gift from George Washington Print E-mail
Written by Dale R. Beeks   
Wednesday, 31 August 2005

A 1.689Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

George Washington's activities as a plantation owner, military superior and statesman are well documented, however, little is known about George Washington the surveyor. George's father, Augustine Washington, died in 1743 when George was eleven years old. Augustine, a farmer and surveyor, left his instrument to George who learned the art of surveying through his brother, Lawrence, and possibly from other regional surveyors including County Surveyor George Byrne. By 1746-47 George was running lines for area farms. Within the Library of Congress Manuscripts collection is George's first known survey of the Ferry Farm dated 1747. In 1748, at age 16, George ran lines for his brother Lawrence and joined in surveys of the Lord Fairfax lands.

Around 1750 Lord Fairfax invited George to Winchester Virginia to assist in the survey to plat lands in the Northern Neck Grant and properties along the Shenandoah Valley. In 1750, at the age of 18, George made his first land track purchase of 453 acres near Bullskin Creek south of Charleston, North Virginia.

In 1752 his brother Lawrence died and George assumed the responsibilities of the Mt. Vernon plantations until the death of his brother's wife Anna in 1761. George maintained his responsibilities as a surveyor and was actively platting lands as late as 1799.

Documented within the original executor's inventory of the Mount Vernon furnishings are noted many surveying instruments "...within the iron chest...", "in ...lumber rooms..." and, "... in the study....".

Washington's respect for the art of surveying may have influenced his choice of gifts to both his nephews. Because George Washington owned property in Winchester, Virginia from 1753 through 1794, together with his knowledge of the art of surveying, it is likely he was an acquaintance of the respected clock and instrument maker Goldsmith Chandlee.

Goldsmith Chandlee was a 3rd generation Quaker clock and instrument maker active in Winchester, Virginia during the last quarter of the 18th and first quarter of the 19th century. He was a contemporary of Philadelphia instrument makers David and Benjamin Rittenhouse, and made compasses for statesmen, landowners and important political figures. He must be recognized as a most notable American maker. His compasses are elaborate and precise with engraved decorations, calculating tables and multiple counters, all unique to his manufacture.

Washington had two nephews who received Goldsmith Chandlee compasses as gifts. Lawrence Washington's compass was probably given to him with the Mount Vernon property. It is now owned by the Mt. Vernon Ladies' Association and is located at Mount Vernon.

It may be assumed the Laurence Lewis Goldsmith Chandlee compass was given to Nephew Laurence Lewis (on Martha's "Custis" side of the family) when George Washington gave Nelly Custis and Laurence Lewis the Virginia Woodlawn Plantation as a wedding gift in 1799.

Like the Lawrence Washington compass, the dial of the compass is signed with both ownership and maker names. This compass is engraved on the dial, "G. Chandlee, L. Lewis". This is Chandlee's typical manner of engraving a name to an owner or recipient. The lid to the compass is engraved "LL.". This form of identification engraving on the lid has also been documented in other early compasses made by Goldsmith Chandlee. This compass has a well documented provenance in the Lewis family since its gifting from George Washington, until its private acquisition several years ago.

Dale Beeks is Director of the Instrument Identification Committee for the Surveyors Historical Society. He has spent twenty-five years as a collector, purveyor and curatorial consultant, dealing with all aspects of early surveying instruments, the art of surveying and survey history. He lives in Mt. Vernon, Iowa.

Author's Note: Further information on the Chandlee family and instruments may be found in articles by Dr. Richard Elgin at www.surveyhistory.org/goldsmith_chandlee.htm; Rittenhouse Journal, A Journal of the American Scientific Instrument Enterprise; and two books by Silvio A. Bedini, Early American Scientific Instruments and Their Makers and With Compass and Chain, Early American Surveyors and Their Instruments.

A 1.689Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

 
< Prev   Next >

 American Surveyor Recent Articles
 
Editorial: Setting Our Sights
Years of planning and construction went into Beijing's iconic bird's nest stadium that is now synonymous with 2008 games. With Vancouver slated to host the Winter Games in 2010, surveyors have been hard at work helping to ready the infrastructure. Diversifying: For those of you looking for ....
Read the Article
 
Point to Point: Boundaries by Acquiescence
We retracement surveyors, for the most part, labor within a stable and consistent part of the law. By this, I mean that from place to place, and over time, there is little variation in the doctrines defining correct practice. Monuments, everywhere, trump courses and distances, in the event of ....
Read the Article
  
WowFactor: The Trimble VX Spatial Station
It's not unusual to find a digital camera as standard equipment for a survey crew. Providing photos of monuments, project sites and other evidence is a routine part of the surveyor's work. Now­instead of a flat drawing and some simple snapshots­imagine giving your client a 3D walkthrough tour of ...
Read the Article
 
Vancouver Trains For Olympic Games
More than one million athletes, judges, volunteers and visitors are expected to converge on Vancouver, Canada, and surrounding areas during the 2010 Olympics. Yet many of these visitors won't realize the Olympic-sized engineering and ...
Read the Article
 
Tips & Tricks: Getting More from Your Handheld GPS Unit
Are you getting all that you can from your handheld unit? Are you able to directly observe State Plane coordinates with your handheld? Although inexpensive units may not have a selection for the State Plane coordinate grid that you use in your state, if your State Plane Coordinate Zone uses the ....
Read the Article
 
Survey Reports: Preparing a Survey Report—Part 5
This is the fifth and last article in a series of articles suggesting formats and contents of a survey report. Previous articles dealt with opinions on the location of corners and boundaries [Feb. 2008]; encroachments, gaps and overlaps [Mar. 2008]; limitations of the surveying services [June 2008]; and....
Read the Article
 
RTN­101: Monitoring with RTN (Part 15)
Monitoring is essentially tracking movement over time and is often part of a surveyor's regular line of business. Such tasks are known by many names: subsidence monitoring, deflection monitoring, deformation monitoring, structural integrity monitoring, compliance monitoring, and ...
Read the Article
 
Product Review: Spectra Precision FOCUS 10
The Spectra Precision's FOCUS 10 brings back a lot of memories from an instrument I reviewed several years ago. Without a doubt, the FOCUS 10 has benefited from the former, but is updated and less expensive even in terms of 2002 dollars. And that's a good thing, since ...
Read the Article
 
ProFile: Marshall Robinson
We allow little time in our day-to-day schedules to get to know people much beyond their shells. It was therefore a pleasant change of pace when I received a phone call awhile back from Marshall Robinson, who was calling to order a map from our website ...
Read the Article
 
Vantage Point: Tough Times
The construction slowdown has hit different parts of the country with varying ferocity. The latest jolt to "life as we know it" is a uniform blow to businesses of all sorts, and has the potential to change the financial plans of a number of surveying firms. Within a week, three U.S. motor vehicle ...
Read the Article
 
Surveyors Report: Mimi the Elephant
Years ago I worked for a medium-sized private engineering firm in Denver. We negotiated a continuing services contract with the City and County of Denver for surveying services, and my crew was elected to conduct this work. The City was understaffed by one crew for ...
Read the Article
Featured Amerisurv Events
List Your Event Here
please
contact Amerisurv
15th Annual GeoTech - October 7-8,  2008, NOAA’s Auditorium and Science Center in Silver Spring, MD. Hosted by Potomac Region of the American Society of Photogrammetry and Remote Sensing and co-hosted by the NGS, 1 day of Workshops taught by experts, and 1 day of Technical sessions.,  

27th Annual International Submerged Lands Management Conference - October 26-29, 2008, Traverse City, Michigan. For managers, regulators and practitioners whose work affects or is affected by submerged lands management.

•  GITA's First Annual GIS for Oil & Gas Conference - Calgary - Nov. 6-7, 2008, Calgary Marriott Hotel, Calgary, Alberta, Canada. The GIS for Oil & Gas Calgary Conference will build on the momentum from GITA’s GIS for Oil & Gas Conference held in Houston, Texas, every September.

GITA's “How to Financially Justify Your Geospatial Projects” Two-day Workshop - Nov. 13-14, 2008 in Denver, Dec. 11-12, 2008 in Tampa. All types of organizations now have a unique opportunity to learn from GITA’s landmark research project, “Building a Business Case for Geospatial Information Technology: A Practitioner’s Guide to Financial and Strategic Analysis.”

Geography in Las Vegas - March 22–27, 2009. Join 8,000 geographers, GIS specialists, and environmental scientists from around the world in Las Vegas for the very latest in research, policy, and applications in geography, sustainability, and GIScience, during the annual conference of  the Association of American Geographers. 

California Land Surveyors Association 2009 Conference - March 28-April 1, 2009, Hilton San Diego Resort (Mission Bay). This e-mail address is being protected from spam bots, you need JavaScript enabled to view it , (707) 578-6016.

SPAR 2009 - March 30- April 1, 2009, Hyatt Regency Hotel, Denver, Colorado. SPAR 2009 will focus on best practices for using 3D imaging technologies to design and deliver capital projects as well as operate, modify and maintain production, manufacturing and infrastructure assets.


Share This Item

del.icio.us / Furl/ digg this item!Digg / Slashdot / Y!MyWeb / reddit / newsvine  addtoany
Share on Facebook
Google
 
AMERISURV TOP NEWS


Are you getting our e-newsletter?
Sign up and check out the archives HERE


GOT NEWS? Send To:
submit press

News Feeds

 
Subscribe to Amerisurv news & updates via RSS or get our Feedburn
xml feed

Sponsor


Historic Maps
Careers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your career ad. Feel free to contact us if you need additional information.

 

RSS Feed Options
add to my yahoo!
add to newsgator
add to my AOL
add to bloglines
add to netvibes
add to my google
view with HubDog
technorati
xml feedView Feed XML
 
Need help implementing RSS?
Read this fine tutorial

Add to my Widsets
Amerisurv Mobile



The American Surveyor ©2003 - 2008 All rights reserved / Privacy Statement
Spatial Media LLC
905 W 7th St #331
Frederick MD 21701
301-620-0784
301-695-1538 - fax