About Amerisurv| Contact    
Magazine | Newsletter    
Flickr Photos | Advertise    
HomeNewsNewsletterAmerisurv DirectoryJobsStoreAuthorsHistoryArchivesBlogVideosEvents
Register to receive the Amerisurv Newsletter | Also See Our LiDAR News Newsletter | RSS Feed  
advertisement


Subscriptions
Sponsored By

Software Reviews
Continuing Series
     RTN
An RTN expert provides everything you need to know about network-corrected real-time GNSS observations.
Click Here to begin the series,
or view the Article PDF's Here
76-PageFlip Compilation
of the entire series
Test Yourself

Got Answers?
Test your knowledge with NCEES-level questions.
  Start HERE
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Wow Factor
Sponsored By


Product Reviews
Partner Sites

machinecontrolonline 


lbszone.com

GISuser.com

GeoJobs.biz

GeoLearn

 

Spatial Media LLC properties

Associates

ASPRS

newsnow 

  The American Surveyor     

Woolpert Performs Largest Commercial Single Photon Lidar Acquisition in North America for USGS Print E-mail
Written by Woolpert   
Tuesday, 01 May 2018

The QL1 data was collected across multiple counties in South Dakota as part of the 3DEP initiative.

Lake Andes, S.D. (May 1, 2018) — The U.S. Geological Survey (USGS) contracted Woolpert for single photon lidar (SPL) data acquisition and processing of approximately 3,726 square miles of South Dakota. The task order was issued under the Geospatial Product and Services Contracts (GPSC 3) as part of the 3D Elevation Program (3DEP), which is a USGS initiative to systematically collect enhanced elevation data via high-quality lidar data across the conterminous U.S., Hawaii and the U.S. territories.

This nearly $1 million project was the largest commercial SPL acquisition ever conducted in North America, covering approximately 3,726 square miles in South Dakota. The counties of Aurora, Buffalo, Brule, Charles Mix and Jerauld were included in the project’s area of interest.

The SPL sensor used in the acquisition, the Leica SPL100, is capable of collecting 6 million points per second using 100 output beams. John Gerhard, Woolpert vice president and program manager, said SPL is more efficient and can collect Quality Level 1 (QL1) or denser data from higher altitudes when compared to a traditional linear lidar sensor. Woolpert deployed its Twin Commander turbo-prop aircraft, equipped with the SPL100 sensor, for this project.

“Leica Geosystems developed and provided the sensor, which was introduced last year,” Gerhard said. “As 3DEP and the need for enhanced elevation data applications expand, it’s vital to employ the tools most appropriate to each project to best support the USGS and 3DEP. Leica Geosystems has been a great resource and an outstanding partner on multiple projects.”

“Leica Geosystems has had the privilege to work on many new technology implementations with Woolpert over the years, and the South Dakota project followed the same successful path,” said Bruce A. Wald from Leica Geosystems. “The use of SPL100 on this data acquisition recognizes a major step in the maturity of the technology, both from an operational side as well as from processing and data quality perspectives. It is the direct result of a continued development effort since the initial introduction of the product and the acceptance of the delivered data confirms that the SPL100 meets the goal of providing a highly productive technology, targeted to high point densities and large areas.”

This South Dakota SPL data collection was conducted over two seasons, due to the weather, between late November 2016 and April 2017. The data was then processed by Woolpert and approved by USGS on April 19, 2018. It ultimately will be made available to the public via the USGS National Map website.

About Woolpert
Woolpert is the fastest growing architecture, engineering and geospatial (AEG) firm in the country, delivering value to clients in all 50 states and around the world by strategically blending engineering excellence with leading-edge technology and geospatial applications. With a dynamic R&D department, Woolpert works with inventive business partners such as Google and Esri; operates a fleet of planes, sensors and unmanned aircraft systems (UAS); and continually pushes industry boundaries by working with advanced water technologies, asset management, building information modeling (BIM) and sustainable design. Woolpert’s mission is to help its clients progress and become more progressive. For over 100 years and with 25 offices across the U.S., Woolpert serves federal, state and local governments; private and public companies and universities; energy and transportation departments; and the U.S. Armed Forces. For more information, visit woolpert.com or call 937-531-1258.

 
< Prev   Next >

deliciousrssnewsletterlinkedinfacebooktwitter

Amerisurv Exclusive Online-only Article ticker
Featured Amerisurv Events
List Your Event Here
please
contact Amerisurv


Google
 
AMERISURV TOP NEWS

Carlson SurvCE &
SurvPC 6 Available

GOT NEWS? Send To
press [at] amerisurv.com
Online Internet Content

Sponsor


News Feeds

 
Subscribe to Amerisurv news & updates via RSS or get our Feedburn
xml feed

Need Help? See this RSS Tutorial

Historic Maps
Careers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your GeoJobs career ad. Feel free to contact us if you need additional information.

 

Social Bookmarks

Amerisurv on Facebook 

Amerisurv LinkedIn Group 

Amerisurv Flickr Photos 

Amerisurv videos on YouTube 

twitter

 




The American Surveyor © All rights reserved / Privacy Statement
Spatial Media LLC
7820B Wormans Mill Road, #236
Frederick MD 21701
301-620-0784
301-695-1538 - fax