About Amerisurv| Contact    
Magazine | Newsletter    
Flickr Photos | Advertise    
HomeNewsNewsletterAmerisurv DirectoryJobsStoreAuthorsHistoryArchivesBlogVideosEvents
Register to receive the Amerisurv Newsletter | Also See Our LiDAR News Newsletter | RSS Feed  
advertisement


Subscriptions
Sponsored By

Software Reviews
Continuing Series
     RTN
An RTN expert provides everything you need to know about network-corrected real-time GNSS observations.
Click Here to begin the series,
or view the Article PDF's Here
76-PageFlip Compilation
of the entire series
Test Yourself

Got Answers?
Test your knowledge with NCEES-level questions.
  Start HERE
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Wow Factor
Sponsored By


Product Reviews
Partner Sites

machinecontrolonline 


lbszone.com

GISuser.com

GeoJobs.biz

GeoLearn

 

Spatial Media LLC properties

Associates

ASPRS

newsnow 

  The American Surveyor     

LiDAR In The High-Arctic: Using the Latest Technology to Advance Geomorphology Research Print E-mail
Written by Michael Zanetti, Antero Kukko, Catherine Neish, & Gordon Osinski   
Tuesday, 24 April 2018

A 7.197Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

The newest generation of tripod and mobile LiDAR scanning systems offer the ability to measure surface topography in unprecedented detail. Although LiDAR has been used for decades in geomorphology studies (primarily airborne and tripod systems), mobile LiDAR systems are only just beginning to be used. In the summers of 2016 and 2017 researchers from the University of Western Ontario and the Finnish Geospatial Research Institute, together with industry support from Teledyne Optech, set out to the Canadian High Arctic to map and survey a wide-range of geomorphologic features unique to permafrost terrains. These geologic features offer analytical challenges not commonly encountered in mobile mapping surveys.

Over the course of 3 expeditions in the extreme Canadian High Arctic environment on Devon Island and Axel Heiberg Island we field tested 3 different LiDAR systems and evaluated their use for different geomorphologic measurements. We used the Optech Polaris Terrestrial Laser Scanner (TLS), the Optech Maverick Mobile Mapping System (MMS), and the AkHkA-R3 Kinematic LiDAR System (KLS) prototype scanner developed at the Finnish Geospatial Research Institute. Each instrument produced high-quality data, yielding more than 400Gb of mobile and TLS LiDAR data, but highlighted the importance of choosing the right tool for the job.

Our efforts have produced the highest-ever resolution digital terrain models of enigmatic patterned ground, ice-wedge polygons, and erosional gully systems. Mobile mapping of this terrain also means that DEMs of ultra-high resolution have been created over huge surface areas, facilitating new approaches to scientific research in geomorphology.

The aim of the expeditions was to advance our fundamental understanding of permafrost processes over large areas. As the Arctic climate warms, our understanding of changes within permafrost systems needs to be more complete, and the rapid data-acquisition and ever-higher point density and precision from mobile LiDAR systems can help monitor these changes over time. This has implications for understanding how to build better buildings and roads in the Canadian North as climate warms and ground ice melts. Understanding how these systems change over time will also address challenges with building permanent structures in permafrost terrain.

Background: Permafrost Freeze-Thaw
The daily and seasonal freezing and thawing of the ground in the Canadian High Arctic wreaks havoc on the bare rocks and soil. The volume expansion of water when it freezes in pore spaces and cracks forces rocks to break apart and the ground to fracture. These effects are fairly commonplace in the winter in colder climates, causing potholes in roads and roof damage from backed-up gutters. But in the High Arctic, there are no trees and nearly no vegetation to hold rocks and soil in place, thus freezing, thawing, cracking, and heaving makes everything move around.

The ground of the High Arctic is permanently frozen (permafrost) below a few tens of centimeters of the surface. But within the upper zone, known as the active layer, seasonal freeze-thaw processes work in pore spaces to sort stones and soil into patterns (imaginatively known as "patterned ground" in geomorphology parlance). And, when water infiltrates longer cracks, freeze-thaw processes work to propagate these cracks into fissures (ice-wedges) which then become intertwined and form polygons, creating checkerboard patterns that can cover many square kilometers. On hillslopes, thawing of snowmelt and permafrost at the margins create debris-flows and rockslides, etching into and eroding the landscapes.

These phenomena and the processes controlling them (technically known as periglacial features and processes) have been known and described since the early 1900's, with pioneering work detailing patterned ground coming in the 1950's ­ 1970's. But the characterization of these phenomena (measuring diameter, spacing, trough-depth, and other morphometric parameters) were done with painstaking and unsophisticated manual measurements. For example, year-on-year and decadal changes were measured using marked sticks shoved into the ground. The time-intensive nature of the measurements meant that only small areas could be investigated, mostly in isolation from nearby features.

Now, using ground-based LiDAR scanning, and in particular ultra-high resolution mobile LiDAR scanning techniques, it is possible to study these systems in unprecedented detail and over areas that would have been unimaginable a few decades ago. The speed and repeatability of LiDAR scanning means: 1) more area is covered, which allows for study of the interplay between different morphologic features and processes, 2) less time is required, which allows for researchers to do different experiments or measurements, and 3) inter-season or year-on-year change detection is possible, which allows for the determination of rates-of-change and the effects of small perturbations not captured in long-duration investigations.

Science Investigations
LiDAR data is being used by our team for a wide range of science investigations. Our main projects involved surveying and mapping patterned ground, ice-wedge polygons, debris flows and channeled slopes, and sub-glacial drainage channels in order to measure various morphometric parameters (length, width, diameter, depth, etc.). These data are used in concert with ground probe data, geologic mapping, and remote-sensing datasets to interpret the underlying geologic processes acting to shape the landscape. Looking forward to future expeditions planned in 2018 and 2019 (and with other LiDAR data collected over the past decade), we will measure small scale year-on-year changes to establish rates of change for these systems.

The individual scanning sites are also part of an overarching project aimed at using remote predictive mapping techniques to explore the geology of the Canadian High Arctic. The prohibitive cost and logistical challenges of geologic mapping with field geologists in remote areas means that many areas have never been studied. We are using integrated remote-sensing datasets (e.g. LANDSAT-8, ASTER, RADARSAT-2, Quickbird, etc.) to identify sites of interest for ground-truth field campaigns. The characteristics of these sites (e.g., composition, roughness, topography) allow for educated interpolation of geology over large regions, with particular interest in economically viable ores. The high-resolution LiDAR topography helps us understand and interpret the satellite radar backscattering signals because we can now accurately measure the surface roughness at length scales below the radar wavelength, and over areas on the ground large enough to cover multiple radar image pixels.

Our Field Sites
We mapped more than 50 sites of interest on two of the largest islands in the Canadian Arctic Archipelago: Devon Island and Axel Heiberg Island. On Devon Island, the largest uninhabited island in the world, our primary field site was located within the Haughton Impact Structure, a well-preserved 24 million year old, ~23 km diameter impact crater. On Axel Heiberg Island we were based out of Strand Fiord, a glacier carved valley known for salt tectonics and mineral springs. The two islands offer stark contrast to one another, with Axel Heiberg dominated by mountain peaks and temperate glaciers and Devon Island dominated by desolate, unvegetated plateaus. To get to our respective basecamps on the islands we flew in with all of our gear on Twin Otter aircraft from Resolute Bay, a community of ~200 people and home to the Polar Continental Shelf Program logistics facility. This included a few Kawasaki Bayou 200 ATVs (on Devon) and two mountain bikes equipped with fat tires (on Axel Heiberg). The provided means for getting to local sites, but we also had ~6 total days of helicopter time to shuttle us to more distant sites. We bunked in individual tents and shared a common "Space-dome" tent and a separate cooking tent. On these large scientific expeditions we had some amenities, including a proper touch-screen desktop computer (for planning, uploading data each night, and discussion, plus a movie when the weather turned awful). Equipment was stored in a separate tent.

The weather at this high latitude is variable, but surprisingly not as frigid as one thinks when they hear "polar" research. Temperatures hovered around 1-5°C (32-41°F), with some days above 10°C (50°F). Drizzle and cloud cover were frequent, slowing data collection, but fresh snowfall was rare. The greatest benefit to Arctic research in the summer is the 24-hour sunlight, allowing for scanning at all times. If poor weather affected some part of the day we could always pick up the time later. My partner and I would often head out for several hours of scanning at midnight, since this seemed to be the time of day when the sun liked to shine.

Because we were in such remote and rugged terrain, the instruments were subjected to the cold nearly constantly. This affected battery life a bit, but not too much. The cold did, however, impact our daily routine when loading up the scanners for field surveys. Cold sinking the instruments overnight meant that we needed to bring them into the communal tent after breakfast to "get some heat in them". We would hook them up to direct power while we loaded our ATVs and got water for the day. This typically let us hit the ground running when we got to our first site, but on more than one occasion we lost data collection opportunities. Embarrassingly, more than one site was lost when the lens-cap was left on for a scan. Normally this could be laughed off, but it's less funny when you've just hiked 2 km traversing a 100 m x 100 m grid carrying a 20 kg (45 lbs) pack. One team member earned the nickname "Lens-cap" for repeated absent-mindedness.

Data Collection and Processing
Data collection methods varied by instrument and the features of interest. Flat ground sites, like those used for morphology of patterned ground and surface roughness analyses were most often done with the mobile systems (Optech Maverick and Akhka-R3), although some multi-look tripod scans were done in areas when the mobile systems were already deployed. To collect the mobile data we built a custom backpack mount for the Maverick instrument; the Akhka-R3 is designed to be a permanent backpack-mounted instrument. Ground scans took about 15 mins each and were done by mapping out and flagging a 50 m x 50 m (or larger) box and traversing back and forth in a grid to saturate the point clouds and minimize shadows. It is from these scans that we achieved the 1 ­ 2 cm/pixel highest resolution DEMS. Mobile processing was done using the Distillery software for the Maverick, or by a combination of Novatel Inertial Explorer, Riegl proprietary software, and TerraSolid programs (for processing operator and laser trajectories and point cloud matching for the Akhka-R3). Although some analysis for our purposes could be done directly with the point clouds, georeferenced DEMs were created from .LAS files in ESRI's ArcMap (10.4.1) for integration with other remote-sensing datasets. The major difference between the Maverick and Akhka-R3 instruments was found to be with the laser scanner (Velodyne HDL-32E vs Riegl VUX-1HA, respectively), affecting the corresponding point cloud density, scanning range (~75 m) , and final DEM resolution. For mapping grade (~20 cm/ pixel) requirements the Maverick produced excellent ground data. Higher resolution (<2 cm/pixel) near-survey grade measurements were made with the Akhka-R3 (which is a similar system to the commercial ROBINprecision system from 3D Laser Mapping).

Debris slopes and large rock outcrops were best analyzed by the tripod-mounted TLS systems (e.g., Optech Polaris TLS), where we scanned kilometers long plateau faces with multiple scans. As part of a multi-year study of gully erosion, many of the TLS scans taken during these expeditions were also of areas where we had existing Optech Ilris TLS scans. Polaris TLS scans were processed using ATLAScan software for point cloud merging and georeferencing, and exported to ArcMap for DEMs.

Owing to the longer range of the Riegl VUX-1HA scanner on the Akhka ­ R3 mobile system, we had great success mapping the same gully systems as the Polaris, with reduced shadowing. This increased coverage came at the expense of increased time and energy (from strenuous hiking) to do these scans, but did provide more uniform resolution. We also tested using the backpack scanners while driving on ATVs (Akhka-R3) and while biking (Maverick). Since the backpack scanners are top-heavy, this made for very uncomfortable scanning, but the results proved reasonable. The terrain was very rough, so the final point clouds were a bit noisier for the vehicle traverses.

Most areas were also photographed with UAV drones or cameras integrated with the systems. However, we have found that integrated imagery is less useful for analyses than anticipated and are best suited for general context use.

Conclusion
The ultra-high resolution of the newest generation LiDAR is critical to advancing geomorphologic studies. Because the technology is so new, and the data returned orders of magnitude higher in resolution than anything previous, we (scientists) are just now devising ways to analyze and interpret the data, and use it to its fullest potential.

Dr. Michael Zanetti is a post-doctoral associate at the University of Western Ontario specializing comparative planetary geomorphology and the integration of ground-based LiDAR with satellite remote-sensing data.

Dr. Antero Kukko works for the Finnish Geospatial Research Institute as a research manager and is an adjunct professor in the Department of Built Environment, Aalto University, Finland. His research is focused on the development and application of mobile/ kinematic laser scanning.

Dr. Catherine Neish is an Assistant Professor of Earth Sciences at the University of Western Ontario. She is an expert in the use of orbital radar observations to study the geology of planetary surfaces, with a particular focus on processes related to impact cratering and volcanism.

Dr. Gordon "Oz" Osinski is an Associate Professor and the NSERC/MDA/CSA/ CEMI Industrial Research Chair in Earth and Space Exploration in the Departments of Earth Sciences and Physics and Astronomy at the University of Western Ontario, Canada. He holds a PhD and BSc (Hons) in geology and has spent the past 20 years conducting fieldwork on several continents with a focus on understanding the processes that shape the surface of the Earth and other terrestrial planets.


Acknowledgements: The authors wish to acknowledge funding and support from: The University of Western Ontario, Finnish Geospatial Research Institute and the Academy of Finland (CoE-LaSR and 300066), NSERC Discovery Accelerator Supplement (C. Neish), NSERC Engage Grants for Universities (C. Neish), NSERC Discovery Grant Northern Supplement (G. Osinski), The Polar Continental Shelf Program (PCSP) for logistical support in the Arctic, and our colleagues in the field.

A 7.197Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

 
< Prev   Next >

deliciousrssnewsletterlinkedinfacebooktwitter

Amerisurv Exclusive Online-only Article ticker
Featured Amerisurv Events
List Your Event Here
please
contact Amerisurv


Google
 
AMERISURV TOP NEWS

Carlson Unveils
PhotoCapture

GOT NEWS? Send To
press [at] amerisurv.com
Online Internet Content

Sponsor


News Feeds

 
Subscribe to Amerisurv news & updates via RSS or get our Feedburn
xml feed

Need Help? See this RSS Tutorial

Historic Maps
Careers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your GeoJobs career ad. Feel free to contact us if you need additional information.

 

Social Bookmarks

Amerisurv on Facebook 

Amerisurv LinkedIn Group 

Amerisurv Flickr Photos 

Amerisurv videos on YouTube 

twitter

 




The American Surveyor © All rights reserved / Privacy Statement
Spatial Media LLC
7820B Wormans Mill Road, #236
Frederick MD 21701
301-620-0784
301-695-1538 - fax