About Amerisurv| Contact    
Magazine | Newsletter    
Flickr Photos | Advertise    
HomeNewsNewsletterAmerisurv DirectoryJobsStoreAuthorsHistoryArchivesBlogVideosEvents

Sponsored By

Software Reviews
Continuing Series
An RTN expert provides everything you need to know about network-corrected real-time GNSS observations.
Click Here to begin the series,
or view the Article PDF's Here
76-PageFlip Compilation
of the entire series
Test Yourself

Got Answers?
Test your knowledge with NCEES-level questions.
  Start HERE
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Wow Factor
Sponsored By

Product Reviews
Partner Sites







Spatial Media LLC properties




Home arrow Archives   The American Surveyor     

Tracer Triangulation Print E-mail
Written by Jerry Penry, PS   
Friday, 22 March 2013

A 793Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

The concept of firing tracer bullets into the air for triangulation initially drew many skeptics, but for those who put it into practice the apparatus saved both time and money. Before the advent of the modern technology of satellites, a visible line of sight was critical for traversing or triangulating between obscured points on the ground. Government agencies built tall towers to reach above the trees or to see over the tops of hills, but the average surveyor often had to traverse through many intermediate points to go over or around existing obstacles.

By the 1960s, triangulation was still rarely performed by the average surveyor due to the calculations involved and the hindrance of not being able to see a sight above a distant point. Solving this dilemma was simple in concept--extend something vertically above the point to be seen from far away. The solution to this problem, however, was frustrating. Tall connected range poles leaned. Helium filled balloons could not be trusted in the slighted breeze. Laser beams had not been perfected. Beacons on aircraft hovering above a point could not ensure the desired accuracy.

On November 7, 1967, Albert L. Whitehead of Arvada, Colorado, filed a design with the United States Patent Office for an apparatus which was to fire a rocket flare, tracer bullet, or other projectile from an appropriate launcher mounted on a tripod (3,350,783). It is unclear if Whitehead's idea ever advanced beyond the design and patent stages.

Whitehead was not alone in his vision of surveying by use of a vertical tracer. The father and son team of Norman E. and Jan Van Sickle, of Council Bluffs, Iowa, experimented with their own design for many years dating back to the late 1960's. After several years of diverting money from the family surveying business toward the project, the Van Sickles created their first prototype of a tracer triangulation system in 1972. The tracer bullet, however, was always their first objective of the system and was deemed the key to developing a successful patent. Initial experiments utilized shotgun tracers and then transitioned to using a .45 caliber handgun cartridge. The bullet design had to be unlike a normal military tracer since it needed to be viewed from the side and not from behind. The tracer also had to be clearly visible during daylight in order for surveyors to turn angles to its location.

A patent for a `Firearm Alignment and Support Apparatus' was filed by Norman E. Van Sickle with the United States Patent Office on January 23, 1978, and granted on June 24, 1980 (4,208,946). His patent for the tracer bullet was filed on June 20, 1979, and was granted on November 24, 1981 (4,301,732). The development of the apparatus closely coincided with the advent and popularity of the programmable calculator and with the introduction of Electronic Distance Measurement (EDM) instruments. With the calculator and EDM, surveyors could establish and measure long triangulation baselines with precision and perform the necessary computations for triangulation in the field.

Multiple theodolites would be positioned along the measured baseline and coordinated by two-way radio to individually sight the vertical tracer extending upward from an obscured point. Repeating the process by moving the apparatus to other obscured points then created a triangulation network from the baseline. Utilizing more than one apparatus greatly sped up the process. Since more than one instrument on the baseline were simultaneously triangulating to the same point, multiple sets of coordinates were quickly calculated in the field upon that same point. Upon comparison of the coordinate values and evaluation of the desired precision, the position was quickly determined to be good or bad. The 500-foot-long tracer streak, which was actually a point of light to the eye or brain, could easily be viewed from several miles away during the day and for over ten miles at night. The streak of light was determined to only be visible for 0.65 of a second, but the human eye has no difficulty responding to something this brief. The theodolite operators would first have a general idea where the tracer was to appear and then select something in the background to sight after the initial firing. With each successive firing the crosshair would be slightly adjusted until it was illuminated on both sides.

Many potential customers remained skeptical until actually viewing demonstrations by the Van Sickles and personally witnessing the achieved accuracy. Naturally, the concerns with firing a bullet into the air ranged from hitting an airplane, striking someone upon descent, and starting fires. The fire danger from a tracer bullet, particularly in forests, was of greatest concern. The Van Sickles explained that after the tracer burned out, the bullet kept traveling upward and had sufficient time to cool by the time it returned to the ground. Due to their chemical properties, the bullets were never hot. These magnesium bullets produced light rather than fire.

When the Van Sickles began production of their surveying apparatus, they initially hand loaded the tracer rounds for their customers. As part of the design, an aluminum rod below the gun transferred the blast downward to the ground, insuring the apparatus' stability. The Van Sickles sent fliers to surveyors and held demonstrations at conventions. The price for the complete system was $4,000. Less than one dozen of these Van Sickle designs were built. Those early models do not bear any markings.

A complete and independent test of the Van Sickle survey system came on March 27, 1979, when the U. S. Geological Survey's Topographic Division, the Missouri State Surveyors Office, the U. S. Forest Service, and the University of Missouri joined forces for an evaluation near Rolla, Missouri. The tests came under the supervision of Dr. Joseph H. Senne who was chairman of the Department of Civil Engineering at the University of Missouri. For one of the tests, a baseline of just over 3000 feet was measured by EDM near the center of the project with the azimuth determined by solar observations. Four tracer systems were placed at the N Ľ, NE, and SE corners of a section and upon an azimuth mark. Two T-2 theodolites were placed on the ends of the baseline. Direct and reverse angles were recorded to one second of an arc upon the tracers during wind gusting up to 20mph. The tracers being fired were 216-grain .45 caliber bullets with a muzzle velocity of 770 fps. One month later the U. S. Forest Service ran an open end traverse through the same points of the experiment for a comparison.

The results of the experiment were later published in the American Congress on Surveying and Mapping Journal of March 1981. The two separate experiments were deemed a complete success with an absolute value of differences in coordinate comparisons of 0.30 feet. None of the surveyors who participated in the experiments had any previous training with the system except for a two-hour familiarization meeting the previous evening. Robert E. Myers, State Surveyor of Missouri, observed the tests and stated: "With proper reconnaissance, careful establishment of the base lines, care in making observations and with selection of good triangles for the computation, this instrument and its resultant techniques could be effectively used for cadastral control work."

Chief Industries of Grand Island, Nebraska, later bought the patent and began changing the design. Hornady, a major ammunition manufacturer in Grand Island, began producing the tracer rounds to be fired from the apparatus. Those systems sold by Chief Industries were given the name "MagTrac Survey System" and are believed to bear the markings from that company. Initially, the main component to fire the tracer round was a Thompson Center Contender .45 caliber pistol. This gun can also fire a .410-gauge shotgun round that could be used to clear obstructing tree canopy above the point before the tracer round was fired. Eventually, the system was redesigned to an electronic firing system with a short barrel that did not require the use of a conventional firearm.

Several types of bullets were used. These included coreless types with thick hollow lead bullet jackets, a brass bullet loaded in a case, and at least three different copper bullets which differed in nose configuration. Ammunition cartons were marked "MagTrac Signals" and were packaged 20 to a box.

According to the Chief Industries 4-page brochure printed in 1986, the tracer appeared as a vertical moving orange light which extended 1,200 feet. Horizontal visibility varied with background brightness and air clarity. Pointing was expected to take from six to ten shots until the sighting was fixed in the instrument crosshair. The MagTrac launcher consisted of a cylindrical device which fit into a standard tribrach on a surveyor's tripod with centering by means of the optical plummet. The electronic firing system could only be fired while in an upright position and required a two-stage process. The firing buttons were mounted on a box with a six-foot remote cord allowing the operator to fire the system from a safe distance. The use of the tracer system was advertised to save surveyors 30% of the project cost.

Chief Industries stated that maximum efficiency was achieved with standard one-second theodolites along three baseline stations. Field tests indicated that an accuracy between 0.1 and 0.2 feet was obtainable when sighting the tracer from distances in the two to three mile range. This indicated an accuracy of 1:50,000 and 1:100,000. A specially made backpack system allowed the user to easily transport the system to remote areas. By 1986, Chief Industries was already stating their system could work in heavily forested areas where satellite systems and photogrammetry could not be used.

Despite the repeated and proven tests, many surveyors who never used the system or witnessed a demonstration remained skeptical. The Van Sickles, owners of Space Age Surveyors, Inc., became somewhat of an enigma to some surveyors who reasoned they were surveying by unconventional and unproven methods. Those writing the minimum standards for limits of closure in their state's regulations could not agree on how to handle the situation when standards had clearly been established for other methods of surveying. It became a difficult chapter for the Van Sickle family, but also something they would rather leave in the past. Norman E. Van Sickle died on March 16, 2006, at age 90. The Van Sickles were pioneers in the surveying industry and developed a system that to this day still cannot be equaled when determining the position upon a point in heavily forested areas.

Note: Jan Van Sickle contributed to the historical information contained in this article.

Jerry Penry is a historical writer, public speaker and published author. He is a licensed land surveyor in the states of Nebraska and South Dakota.

A 793Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

< Prev   Next >

 American Surveyor Recent Articles
Marc Cheves, PS 
Editorial: A Great Year to be a Surveyor
Some magazines have what are called "theme" issues. That is, most of the content is focused on one particular subject. In my 22+ years of survey magazine publishing, my philosophy has always been to have a little bit of everything in each issue, thereby eliminating the possibility that ....
Read the Article
Jason E. Foose, PS 
Decided Guidance: Case Examinations: Halverson v. Deerwood Village
Whew! We really beat the snot out of Bryant v. Blevins and practical locations. Well this month we're back on new case that hit the Minnesota Supreme Court's docket in 1982. We've got the familiar gymnastics of jurisprudence featuring an extraordinary array of flying rope stretchers ...
Read the Article
Michel Philips 
Extreme Environment Surveying
A Franco-Chilean team of cave divers used the Nautiz X8 rugged handheld for marine cave surveying, gathering data to classify the inaccessible northern half of Madre de Dios for UNESCO World Heritage. The team of cave divers used the Nautiz X8 ....
Read the Article
Erik Dahlberg 
The Original Green Engineers
Sometimes, it's best just to leave things as you found them. That's the lesson shared by Dr. Richard Miksad and his students at the University of Virginia. As a result of studies covering nearly a decade, Miksad's teams have developed detailed ....
Read the Article
Dave Lindell, PS 
Test Yourself 49: No Dimensions
In square A-C-D-B with side S, C-E is tangent to the semicircle Q1 with diameter B-D. Q2 is the inscribed circle of A-C-E. The tangent to Q1 and Q2 meets the sides of the square at F and H and intersects C-E at t G. Q3 is the inscribed circle of C-G-H. What is the ratio of the radii of circles ....
Read the Article
Jerry Penry, PS 
Discovery on Grizzly Peak
When First Lieutenant Montgomery M. Macomb arrived in Carson City, Nevada, from Washington D.C., on July 28, 1878, his assigned survey crew from the 4th Artillery was waiting and ready for the new field season. At age 25, Macomb was the leader ....
Read the Article
Wendy Lathrop, PS, CFM 
Vantage Point: Fighting City Hall Over Land
Once upon a time (1989 to be exact) in a place not so far away from where I live, a man (Francis Galdo) bought a home across the street from a vacant parcel owned by the City of Philadelphia. That parcel, along with others, had been acquired by condemnation back in 1974 subsequent to a 1956 ....
Read the Article
Patrick C. Garner, PS 
Book Review: Boundary Retracement: Processes and Procedures
When I was in my mid-twenties and learning the honorable profession of land surveying, I was lucky to be guided by a mentor who would grab a book off his office shelf and say, "Every surveyor should have a copy of this!" The first example he waved at me was Davis, Foote and Kelly's Surveying ....
Read the Article


Amerisurv Exclusive Online-only Article ticker
Featured Amerisurv Events
List Your Event Here
contact Amerisurv


Javad Intros
Total Solution

press [at] amerisurv.com
Online Internet Content


News Feeds

Subscribe to Amerisurv news & updates via RSS or get our Feedburn
xml feed

Need Help? See this RSS Tutorial

Historic Maps

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your GeoJobs career ad. Feel free to contact us if you need additional information.


Social Bookmarks

Amerisurv on Facebook 

Amerisurv LinkedIn Group 

Amerisurv Flickr Photos 

Amerisurv videos on YouTube 



The American Surveyor © All rights reserved / Privacy Statement
Spatial Media LLC
7820B Wormans Mill Road, #236
Frederick MD 21701
301-695-1538 - fax